Verilog Design Flow

name: Verilog Design Flow description: Design, implement, and verify Verilog/SystemVerilog modules with spec-driven development, self-checking testbenches, and automated simulation workflows. Supports Synopsys VCS, Cadence Xrun, Icarus Verilog simulators, and slang static syntax checker. Use when the user needs to write Verilog modules, design digital circuits, create counters/FSMs/interfaces, simulate and verify designs, or analyze VCD waveforms.

Core Rules

Phase 1: Understand Requirements

1. Ask clarifying questions if the design spec is incomplete
2. Identify: clock/reset strategy, interface signals, functionality, timing constraints
3. Confirm the target: synthesis (FPGA/ASIC) or simulation only

Phase 2: Write Design Spec

1. Create a markdown spec document with:
2. Module name and purpose
3. Port list (direction, width, description)
4. Functional description
5. Timing diagram (if applicable)
6. Test scenarios checklist
7. Store spec in memory or as a file for reference

Phase 3: Implement Verilog

1. One-always-one-signal coding style: Each signal should be assigned in exactly one always block
2. Separate sequential (posedge clk) and combinational (@*) logic
3. Declare intermediate signals for complex logic
4. Avoid mixing blocking (=) and non-blocking (<=) assignments in the same always block
5. Follow synthesizable coding guidelines:
6. Use always @(posedge clk) for sequential logic
7. Use assign or always @(*) for combinational logic
8. Avoid latches (ensure all branches assign in combinational blocks)
9. Explicit reset strategy (sync/async)
10. Include header comments with author, date, and revision (see Version Tracking below)
11. Use descriptive signal names, avoid single-letter variables

Phase 3b: Static Syntax Check with Slang

Before simulation, run static syntax checking using slang:

# Check Verilog/SystemVerilog syntax
slang <module_name>.v

# Or for SystemVerilog files
slang <module_name>.sv

What slang checks: - Syntax errors and parsing issues - Type mismatches - Undefined references - Port connection errors - SystemVerilog compliance

If slang reports errors: 1. Fix all syntax errors before proceeding to simulation 2. Pay attention to warnings about potential issues 3. Re-run slang until "Build succeeded: 0 errors"

Phase 3c: Design Review Checklist

Before simulation, verify: - [ ] Slang syntax check passes (0 errors) - [ ] All sequential signals have explicit reset values - [ ] No combinational logic loops (synthesis will error) - [ ] No unintentional latches (all if/case branches assign in combinational blocks) - [ ] State machines have default case branch - [ ] Clock domain crossing signals are properly synchronized - [ ] Vector widths match between assignment source and destination - [ ] Array indices are within declared bounds - [ ] No blocking assignments (=) in sequential always blocks - [ ] No non-blocking assignments (<=) in combinational always blocks - [ ] timescale directive present in all source files

Phase 4: Write Testbench

1. Create self-checking testbench using:
2. Clock generator (typical: always #5 clk = ~clk; for 10ns period)
3. Reset stimulus
4. Input stimulus generation
5. Expected output generation/comparison
6. $display() or $monitor() for pass/fail reporting
7. $finish() after all tests complete
8. Save as <module_name>_tb.v

Phase 5: Simulate with EDA Tools

The skill automatically detects and uses available simulators in priority order: 1. Synopsys VCS (if vcs command available) 2. Cadence Xrun (if xrun command available) 3. Icarus Verilog (fallback)

Simulator Detection Logic

# Priority order: VCS → Xrun → Icarus
which vcs && use_vcs
which xrun && use_xrun
fallback to iverilog

Synopsys VCS (Verilog)

vcs -full64 -debug_acc+all -l sim.log -R <module_name>.v <module_name>_tb.v

Synopsys VCS (SystemVerilog)

vcs -full64 -debug_acc+all -sverilog -l sim.log -R <module_name>.sv <module_name>_tb.sv

Cadence Xrun (Verilog)

xrun -64bit -access rwc -l sim.log <module_name>.v <module_name>_tb.v

Cadence Xrun (SystemVerilog)

xrun -64bit -access rwc -sv -l sim.log -R <module_name>.sv <module_name>_tb.sv

Icarus Verilog (Fallback)

iverilog -o <module_name>.vvp <module_name>.v <module_name>_tb.v
vvp <module_name>.vvp

VCD Waveform Output

⚠️ Important: Always use VCD format for waveform dumping to ensure compatibility:

initial begin
    $dumpfile("<module_name>.vcd");
    $dumpvars(0, <module_name>_tb);
end

• VCS and Xrun support VCD via $dumpfile()/$dumpvars()
• FSDB format (for Verdi) is NOT supported by the VCD analysis scripts
• Keep testbench VCD-compatible for cross-simulator portability

Phase 6: Debug & Iterate

1. If assertions fail or outputs incorrect:
2. Review waveforms with gtkwave OR
3. Use Python VCD analysis script: python3 <skill_dir>/scripts/check_vcd.py <module>.vcd
4. See references/vcd-analysis.md for detailed API
5. Fix RTL bugs, update testbench if needed
6. Re-simulate until all tests pass
7. Update spec with any design changes

Testbench Template

`timescale 1ns/1ps

module <module>_tb;
    // Parameters
    parameter CLK_PERIOD = 10;

    // Signals
    reg clk;
    reg rst_n;
    // ... add inputs/outputs

    // Instantiate DUT
    <module> dut (
        .clk(clk),
        .rst_n(rst_n),
        // ... ports
    );

    // Clock generation
    initial begin
        clk = 0;
        forever #(CLK_PERIOD/2) clk = ~clk;
    end

    // VCD dump
    initial begin
        $dumpfile("<module>.vcd");
        $dumpvars(0, <module>_tb);
    end

    // Test stimulus
    initial begin
        // Initialize
        rst_n = 0;
        // ... init inputs

        // Release reset
        #(CLK_PERIOD * 2);
        rst_n = 1;

        // Apply test vectors
        // ... stimulus code

        // Check results
        // ... self-checking assertions

        #(CLK_PERIOD * 10);
        $finish();
    end

    // Monitor
    initial begin
        $monitor("Time=%0t: signals=...", $time);
    end
endmodule

VCD Analysis

For automated waveform checking, use Python VCD parsing. Reference: references/vcd-analysis.md

Data Storage

• Design specs: Store in memory/verilog_specs/<module_name>_spec.md
• Verilog files: Create in workspace as <module_name>.v
• Testbenches: Create as <module_name>_tb.v
• Simulation outputs: Generate .vvp (Icarus), sim.log, and .vcd files

Simulator Auto-Detection Script

Use the provided helper script to automatically select and run the best available simulator:

# The script checks for VCS → Xrun → Icarus in order
bash <skill_dir>/scripts/simulate.sh <module_name>

Example workflow:

# 1. Detect simulator and run
bash scripts/simulate.sh counter

# 2. Check simulation log
cat sim.log

# 3. Analyze VCD waveforms
python3 scripts/check_vcd.py counter.vcd

External Tools

Common Pitfalls

Debugging Guide

Simulation Hangs / Freezes

Output Shows 'X' (Unknown)

Timing Issues

Synthesis Errors

Version Tracking

File Header Template

Every Verilog file should include:

/**
 * Module: <module_name>
 * Description: <brief description>
 * Author: <name>
 * Date: <YYYY-MM-DD>
 * Version: <major>.<minor>.<patch>
 * 
 * Changelog:
 *   v1.0.0 - <date> - Initial release
 *   v1.1.0 - <date> - <description of changes>
 *   v2.0.0 - <date> - <breaking changes>
 * 
 * Parameters:
 *   - PARAM1: <description> (default: <value>)
 *   - PARAM2: <description> (default: <value>)
 * 
 * Ports:
 *   - clk: <description>
 *   - rst_n: <description>
 *   ...
 */

Version Numbering

• Major: Breaking changes (interface change, removed features)
• Minor: New features, backward compatible

  7w4.net提供免费和付费技能下载。

• Patch: Bug fixes, no functional change

Git Workflow (Recommended)

# Before starting new feature
git checkout -b feature/new-functionality

# After completing and testing
git add <files>
git commit -m "feat: add <feature> to <module>"
git checkout main
git merge feature/new-functionality

这是一个面向 Verilog 设计的实用技能包，流程覆盖完整，从写代码到测试仿真都有指导。优点是支持多种仿真工具自动切换，配套的波形分析脚本可以直接使用，文档结构清晰易读。不足之处在于内容广而不深，缺乏实际设计案例演示，对于新手来说可能需要补充更多示例才能顺畅上手。总体质量中上，适合有一定基础的开发者使用。